Welcome to BRAUN Lcd Watches - the DW20 and DW30

HOW TO SET YOUR WATCH

When you need to change the time, date or month first press in the very small inset button on right hand edge of case. Use a wooden matchstick or similar to avoid any scratching. The left function button is for the light only and is not used for setting up the watch. Changes are made by pressing the right function button.

1. Press inset button once to change the display from hours/minutes to hours/minutes alternating every few seconds with date/month. The display can be left like this if you prefer.
2. Press inset button again to display month.
        Change month by pressing right function button.
3. Press inset button again to display date.
        Change date by pressing right function button.
4. Press inset button again to display hours.
        Change hours by pressing right function button.
5. Press inset button again to display minutes.
        Change minutes by pressing right function button.
6. Press inset button again and the correct hours and minutes will be displayed - press right function button and watch will start running with seconds counting from 00.

NEED HELP TO FIND A WATCH?

I know from my own experience that to find a good working example of a Braun LCD watch is very difficult. If you have been unable to find a DW20/DW30 just email your requirements and using the contacts I have made since 1998 I'll try to locate one for you.

THANK YOU

My thanks to the following without whose help I would have been unable to complete my collection or produce this website.

Reinald Diederichs, Peter Doensen, Jo Klatt, Heinz G Lehman and of course Dietrich Lubs and Dieter Rams.

A special thanks to both Mark Adams (www.vitsoe.com) for arranging my meeting with Dieter Rams and to Yaman Pathan (www.wider-web.com) for both his expertise and enthusiasm during the construction of this website.